Description
These Aluminum Crush Washers are designed for use with fittings requiring the use of a crush washer to provide a tight leak-proof seal, such as banjo fittings or our magnetic oil drain plugs. These are sized for metric applications, but may have other possible uses. Refer to table below for ID/OD sizing.
| Part Number | OD | ID |
|---|---|---|
| WSHR-AL-M6 | 12.1mm OD | 6.2mm ID |
| WSHR-AL-M8 | 14.1mm OD | 8.2mm ID |
| WSHR-AL-M10 | 16mm OD | 10.2mm ID |
| WSHR-AL-M12 | 18.2mm OD | 12.2mm ID |
| WSHR-AL-M14 | 20.1mm OD | 14.2mm ID |
| WSHR-AL-M16 | 22.1mm OD | 16.2mm ID |
| WSHR-AL-M18 | 24.2mm OD | 18.2mm ID |
| WSHR-AL-M20 | 24.6mm OD | 20.2mm ID |
| WSHR-AL-M22 | 30.1mm OD | 22.2mm ID |
