Description
These Aluminum Crush Washers are designed for use with fittings requiring the use of a crush washer to provide a tight leak-proof seal, such as banjo fittings or our magnetic oil drain plugs. These are sized for AN or ORB applications, but may have other possible uses. Refer to table below for ID/OD sizing.
| Part Number | OD | ID |
| WSHR-AL-03 | 15.9mm OD | 9.8mm ID |
| WSHR-AL-04 | 17mm OD | 11.3mm ID |
| WSHR-AL-06 | 20mm OD | 14.5mm ID |
| WSHR-AL-08 | 25.3mm OD | 19.3mm ID |
| WSHR-AL-10 | 28.28mm OD | 22.5mm ID |
| WSHR-AL-12 | 33.5mm OD | 27.2mm ID |
| WSHR-AL-16 | 40mm OD | 33.5mm ID |
| WSHR-AL-20 | 47.5mm OD | 41.5mm ID |
Notice:Â Our products are designed, engineered, and intended exclusively for automotive off-road, closed-course racing and competition use. Under no circumstances are these products intended, approved, or legal for use on public streets, highways, roadways, or public lands. These products are not designed for use in aircraft, marine vessels, or any braking systems unless explicitly specified.
These products may not be 50-State emissions legal, and may not meet California or CARB guidelines. Please consult with a professional regarding your local laws. It is the buyer's responsibility to verify compliance with local, state, and federal laws.
Professional installation by a certified automotive technician is strictly required. Improper installation or misuse may result in severe vehicle damage, serious injury, or death. We assume no liability for any damages or injuries resulting from improper installation, modification, or misuse of these products.
[Read more]
