Description

FLF’s Oil Filter Mount Bracket is designed exclusively for our Oil Filter Relocation Mount. CAD-designed, stress-tested, and made from lightweight high-temp carbon-fiber-reinforced polymer materials. M8x1.25 hardware is included for bolting from bracket to relocation mount.

Do not exceed 15 lb-ft of torque. Install using hand tools only, do not use any air or electric powered tools. Exceeding 15 lb-ft can permanently damage bracket and will void warranty.

Do not install near any exhaust system. These systems generate excessive heat and can damage the bracket or can cause the hoses carrying flammable oil to fail, resulting in a fire. Your oil systems should not be anywhere near any exhaust system or turbocharger.

Bolt pattern is 46mm from side-to-side, 34mm from top-to-bottom.

Notice: Our products are designed, engineered, and intended exclusively for automotive off-road, closed-course racing and competition use. Under no circumstances are these products intended, approved, or legal for use on public streets, highways, roadways, or public lands. These products are not designed for use in aircraft, marine vessels, or any braking systems unless explicitly specified.

These products may not be 50-State emissions legal, and may not meet California or CARB guidelines. Please consult with a professional regarding your local laws. It is the buyer's responsibility to verify compliance with local, state, and federal laws.

Professional installation by a certified automotive technician is strictly required. Improper installation or misuse may result in severe vehicle damage, serious injury, or death. We assume no liability for any damages or injuries resulting from improper installation, modification, or misuse of these products.

[Read more]