Description
If you’re running hoses or wiring near any sources of high heat, it’s important to keep them insulated and cool. Finish Line Factory’s heat-resistant and flame-resistant Extreme Heat Protection Hose is a sleeve designed to enclose these parts, efficiently insulating them from heat sources up to 500 degrees Fahrenheit.. Perfect for turbocharged cars that need to protect components near the turbo, such as the turbo oil drain or wastegate pressure hoses.
Heat Sleeve to Hose Compatibility Chart
| Sleeve Size | Nylon Braided Rubber Hose | PTFE Lined Nylon Braided Hose | Stainless Steel Braided Rubber Hose | Push Lock Rubber Hose |
| 12mm | -4 AN, -6 AN | -4 AN, -6 AN | -4 AN, -6 AN | -4 AN, -6 AN |
| 15mm | -6 AN, -8 AN | -8 AN | -6 AN, -8 AN | -6 AN, -8 AN |
| 20mm | -10 AN | -10 AN, -12 AN | -10 AN | -10 AN |
| 25mm | -10 AN, -12 AN | | -10 AN, -12 AN | -10 AN, -12 AN |
| 30mm | -16 AN | | -16 AN | |
| 40mm | -20 AN | | -20 AN | |
Notice:Â Our products are designed, engineered, and intended exclusively for automotive off-road, closed-course racing and competition use. Under no circumstances are these products intended, approved, or legal for use on public streets, highways, roadways, or public lands. These products are not designed for use in aircraft, marine vessels, or any braking systems unless explicitly specified.
These products may not be 50-State emissions legal, and may not meet California or CARB guidelines. Please consult with a professional regarding your local laws. It is the buyer's responsibility to verify compliance with local, state, and federal laws.
Professional installation by a certified automotive technician is strictly required. Improper installation or misuse may result in severe vehicle damage, serious injury, or death. We assume no liability for any damages or injuries resulting from improper installation, modification, or misuse of these products.
[Read more]
