Description
These Aluminum Crush Washers are designed for use with fittings requiring the use of a crush washer to provide a tight leak-proof seal, such as banjo fittings or our magnetic oil drain plugs. These are sized for AN or ORB applications, but may have other possible uses. Refer to table below for ID/OD sizing.
| Part Number | OD | ID |
|---|---|---|
| WSHR-AL-03 | 15.9mm OD | 9.8mm ID |
| WSHR-AL-04 | 17mm OD | 11.3mm ID |
| WSHR-AL-06 | 20mm OD | 14.5mm ID |
| WSHR-AL-08 | 25.3mm OD | 19.3mm ID |
| WSHR-AL-10 | 28.28mm OD | 22.5mm ID |
| WSHR-AL-12 | 33.5mm OD | 27.2mm ID |
| WSHR-AL-16 | 40mm OD | 33.5mm ID |
| WSHR-AL-20 | 47.5mm OD | 41.5mm ID |
