Description
Use Finish Line Factory’s Billet Dual Hose Separators for organizing runs of wires, cables, or hoses side by side! Keeps your engine bay neat and organized, a must have for show cars or race cars.
| Hose Part Number | Suitable BDHS Clamp Sizes |
| NYL-4AN | 7/16, 1/2 |
| NYL-6AN | 9/16, 19/32 |
| NYL-8AN | 5/8, 21/32, 11/16 |
| NYL-10AN | 13/16, 7/8 |
| NYL-12AN | 15/16, 1" |
| |
| SSBH-4AN | 7/16, 1/2 |
| SSBH-6AN | 9/16, 19/32 |
| SSBH-8AN | 5/8, 21/32, 11/16 |
| SSBH-10AN | 13/16, 7/8 |
| SSBH-12AN | 15/16, 1" |
| |
| PTNH-4AN | 5/16, 3/8 |
| PTNH-6AN | 7/16, 1/2 |
| PTNH-8AN | 1/2, 17/32, 9/16 |
| PTNH-10AN | 5/8, 21/32 |
| PTNH-12AN | 13/16, 7/8 |
Notice:Â Our products are designed, engineered, and intended exclusively for automotive off-road, closed-course racing and competition use. Under no circumstances are these products intended, approved, or legal for use on public streets, highways, roadways, or public lands. These products are not designed for use in aircraft, marine vessels, or any braking systems unless explicitly specified.
These products may not be 50-State emissions legal, and may not meet California or CARB guidelines. Please consult with a professional regarding your local laws. It is the buyer's responsibility to verify compliance with local, state, and federal laws.
Professional installation by a certified automotive technician is strictly required. Improper installation or misuse may result in severe vehicle damage, serious injury, or death. We assume no liability for any damages or injuries resulting from improper installation, modification, or misuse of these products.
[Read more]
